By chunkhead at Afterdawn
Lot of info about, still a lot of confusion. I will try to make this as simple as possible without getting to technical.
Firstly, If the following setup is too difficult for you, feel free to try the Chimp v2.4 method. I have no experience in this, however others have had results.
Chimp v2.4 Tutorial:
http://www.xbox-hq.com/html/xbox-tutorials-260.html
Ok, what do we need
* Xbox
* Torx 20, 15 and 10 screwdrivers
* IDE Hard Drive
* CD Burner\Writer
* Xboxhdm v1.9
* LiveInfo
* Clean 5960 Dash files
All files can be found here...
http://forums.afterdawn.com/thread_view.cfm/557450#3371151
With all that now in hand, we need to make sure we have the most important part of our operation...The EEPROM
The eeprom is held on a chip on the motherboard. It's a code that locks the HHD and MB together. The HDD is supplied with this code, without it the new HDD will be rejected!
* How do we get it? The easiest way is get it via a dashboard like EvoX. In order for you to get it, start the softmod procedure and stop at the following screen.
* From this screen we have the ability to backup up the eeprom and also to FTP.
For instructions on how to Softmod: http://forums.llamma.com/viewtopic.php?t=9685
For instructions on how to FTP: http://forums.afterdawn.com/thread_view.cfm/523607#3165659
(Network settings for the Softmod dash are found in 'Settings' on the list, just scroll down.)
* Ok, once you have successfully backed up the eeprom, we need to FTP into the Xbox to get the eeprom file. Please refer to the FTP guide above if you are confused.
* Once you successfully FTP the console, you'll need to find the eeprom file. It's located in E:\Udata\2xxxxxxxxxx\0000000000000\Backup.
* Copy this file across to your computer and open 'LiveInfo'. Open the eeprom file in LiveInfo and ensure that the serial number matches the serial number found on the sticker beneath your Xbox console
* If all is well, you should now have your eeprom safely on your PC. Your Xbox is now safe! No matter what happens from here out, you can always recover it!
**PLEASE NOTE***
Under NO circumstances should you EVER use the HDD passkey. Do not write it down, and more importantly, do NOT try to lock\unlock a drive with one! You will end up with a paperweight of a drive 8\10 times! The ONLY solution for locking\unlocking is via the eepom files.
* Now we start making our new drive. Unpack Xboxhdm v1.9 to your HDD. It should look like this...
* Open the 'linux' Folder.
Download and insert the new Dash files (Link is above) into the 'C' folder.
Within the 'E' folder, make two new folders and call them 'TDATA' + 'UDATA'. Both these folders are empty.
Within the 'eeprom folder, insert your 'eeprom.bin' that we salvaged from the Xbox.
Your folders should now look like this...
'linux' Folder
'C' Folder
'E' Folder
'eeprom' Folder
* If all is in place, navigate back to the original 'xboxhdm' folder and click on 'make-iso-win.bat'
* A DOS box will appear and make the 'linux.iso' file
* We now need to burn the 'linux.iso' file. We'll use Nero as our example.
*Open Nero and select 'CD' from the top right and then 'Burn Image To Disc'.
* Click the drop down menu for 'File Of Type' and select 'Image Files'. Our file will appear (assuming you are in the correct directory), select it and click 'Open'
* Burn the image as usual to CD.
USING XBOXHDM v1.9
* Shutdown your PC, unplug the computers HDDs, leaving only the cD-Rom connected. The CD-Rom should be on the 'Secondary cable' (The other cable).
* Power on the computer with the CD we created in the drive. If your BIOS is setup to boot from a CD, you should be greeted with this screen.
* Connect the HDD you wish to format to the 'Primary Master' IDE cable. (Don't forget to give it power) Allow a minute for the drive to be recognised.
* Press "1" and then Type 'xboxhd'
* We then want to press "1" again 'Build a new HD from scratch'
* Just keep typing yes...
* When it's finished, restart the computer until you get to this screen again.
* Type "3" this time
* At the next screen type 'lockhd -a'
* Turn off your computer, reconnect your PC HDD, install the new Xbox HDD and you are done!!!
If you got this far and everthing is working, your Xbox will boot just like a Stock console.
If you would now like to Softmod it: http://forums.llamma.com/viewtopic.php?t=9685
If your HDD is larger then 137GB, you will also need to format a G:\
In order to do that, you will need the UnleashX dashboard.
Go to the 'Format' menu, enter 'Xbox' as the password and the 'Format G:\'. The rest of the space will now be available.
I'd like to give credit to all who helped devise these programs, people who've helped with pics and also all those who share their wisdom with us free of charge!
Lot of info about, still a lot of confusion. I will try to make this as simple as possible without getting to technical.
Firstly, If the following setup is too difficult for you, feel free to try the Chimp v2.4 method. I have no experience in this, however others have had results.
Chimp v2.4 Tutorial:
http://www.xbox-hq.com/html/xbox-tutorials-260.html
Ok, what do we need
* Xbox
* Torx 20, 15 and 10 screwdrivers
* IDE Hard Drive
* CD Burner\Writer
* Xboxhdm v1.9
* LiveInfo
* Clean 5960 Dash files
All files can be found here...
http://forums.afterdawn.com/thread_view.cfm/557450#3371151
With all that now in hand, we need to make sure we have the most important part of our operation...The EEPROM
The eeprom is held on a chip on the motherboard. It's a code that locks the HHD and MB together. The HDD is supplied with this code, without it the new HDD will be rejected!
* How do we get it? The easiest way is get it via a dashboard like EvoX. In order for you to get it, start the softmod procedure and stop at the following screen.
* From this screen we have the ability to backup up the eeprom and also to FTP.
For instructions on how to Softmod: http://forums.llamma.com/viewtopic.php?t=9685
For instructions on how to FTP: http://forums.afterdawn.com/thread_view.cfm/523607#3165659
(Network settings for the Softmod dash are found in 'Settings' on the list, just scroll down.)
* Ok, once you have successfully backed up the eeprom, we need to FTP into the Xbox to get the eeprom file. Please refer to the FTP guide above if you are confused.
* Once you successfully FTP the console, you'll need to find the eeprom file. It's located in E:\Udata\2xxxxxxxxxx\0000000000000\Backup.
* Copy this file across to your computer and open 'LiveInfo'. Open the eeprom file in LiveInfo and ensure that the serial number matches the serial number found on the sticker beneath your Xbox console
* If all is well, you should now have your eeprom safely on your PC. Your Xbox is now safe! No matter what happens from here out, you can always recover it!
**PLEASE NOTE***
Under NO circumstances should you EVER use the HDD passkey. Do not write it down, and more importantly, do NOT try to lock\unlock a drive with one! You will end up with a paperweight of a drive 8\10 times! The ONLY solution for locking\unlocking is via the eepom files.
* Now we start making our new drive. Unpack Xboxhdm v1.9 to your HDD. It should look like this...
* Open the 'linux' Folder.
Download and insert the new Dash files (Link is above) into the 'C' folder.
Within the 'E' folder, make two new folders and call them 'TDATA' + 'UDATA'. Both these folders are empty.
Within the 'eeprom folder, insert your 'eeprom.bin' that we salvaged from the Xbox.
Your folders should now look like this...
'linux' Folder
'C' Folder
'E' Folder
'eeprom' Folder
* If all is in place, navigate back to the original 'xboxhdm' folder and click on 'make-iso-win.bat'
* A DOS box will appear and make the 'linux.iso' file
* We now need to burn the 'linux.iso' file. We'll use Nero as our example.
*Open Nero and select 'CD' from the top right and then 'Burn Image To Disc'.
* Click the drop down menu for 'File Of Type' and select 'Image Files'. Our file will appear (assuming you are in the correct directory), select it and click 'Open'
* Burn the image as usual to CD.
USING XBOXHDM v1.9
* Shutdown your PC, unplug the computers HDDs, leaving only the cD-Rom connected. The CD-Rom should be on the 'Secondary cable' (The other cable).
* Power on the computer with the CD we created in the drive. If your BIOS is setup to boot from a CD, you should be greeted with this screen.
* Connect the HDD you wish to format to the 'Primary Master' IDE cable. (Don't forget to give it power) Allow a minute for the drive to be recognised.
* Press "1" and then Type 'xboxhd'
* We then want to press "1" again 'Build a new HD from scratch'
* Just keep typing yes...
* When it's finished, restart the computer until you get to this screen again.
* Type "3" this time
* At the next screen type 'lockhd -a'
* Turn off your computer, reconnect your PC HDD, install the new Xbox HDD and you are done!!!
If you got this far and everthing is working, your Xbox will boot just like a Stock console.
If you would now like to Softmod it: http://forums.llamma.com/viewtopic.php?t=9685
If your HDD is larger then 137GB, you will also need to format a G:\
In order to do that, you will need the UnleashX dashboard.
Go to the 'Format' menu, enter 'Xbox' as the password and the 'Format G:\'. The rest of the space will now be available.
I'd like to give credit to all who helped devise these programs, people who've helped with pics and also all those who share their wisdom with us free of charge!
